3Com 4200G 12-Port Configuration Manual page 332

318 C 36: SSH T
HAPTER ERMINAL
SFTP Server
Configuration
S
ERVICES
The following sections describe SFTP server configuration tasks:
Configuring service type for an SSH user
■
Enabling the SFTP server
■
Setting connection timeout time
■
Configuring service type for an SSH user
Table 271 Configure service type for an SSH user
Operation
Enter system view
Configure service type for
an SSH user
Enabling the SFTP server
Table 272 Enable the SFTP server
Operation
Enter system view
Enable the SFTP server
Setting connection timeout time
After you set the timeout time for the SFTP user connection, the system will
automatically release the connection when the time is up.
Table 273 Set connection timeout time
Operation
Enter system view
Set timeout time for the SFTP user
connection
Command
system-view
ssh user username
service-type { stelnet | sftp |
all }
Command
system-view
sftp server enable
Command
system-view
sftp timeout
timeout-value
Remarks
-
Optional
By default, the SSH service type is
stelnet.
Remarks
-
Required
By default, the SFTP server is not
enabled.
Remarks
Required
By default, the connection
timeout time is 10 minutes.