3Com 4200G 12-Port Configuration Manual page 231

4200g series switch
Hide thumbs Also See for 4200G 12-Port:
Table of Contents

Advertisement

Figure 67 Evaluate the traffic with the token bucket
Packet to be sent on this interface
Packet sent via this interface
Packet to be sent on this interface
Packet to be sent on this interface
Packet to be sent on this interface
Packet sent via this interface
Packet to be sent on this interface
需由此接口发送的包
需由此接口发送的包
需由此接口发送的包
需由此接口发送的包
需由此接口发送的包
需由此接口发送的包
需由此接口发送的包
1 Evaluate the traffic with the token bucket
The evaluation for the traffic specification is based on whether the number of tokens
in the bucket can meet the need of packet forwarding. If the number of tokens in the
bucket is enough to forward the packets (generally, one token is associated with a
1-bit forwarding authority), the traffic is conforming to the specification, and
otherwise the traffic is nonconforming or excess.
When the token bucket evaluates the traffic, its parameter configurations include:
Average rate: The rate at which tokens are put into the bucket, namely, the
permitted average rate of the traffic. It is generally set to committed information
rate (CIR).
Burst size: The capacity of the token bucket, namely, the maximum traffic size that
is permitted in every burst. It is generally set to committed burst size (CBS). The set
burst size must be bigger than the maximum packet length.
One evaluation is performed on each arriving packet. In each evaluation, if the
number of tokens in the bucket is enough, the traffic is conforming to the
specification and you must take away some tokens whose number is corresponding
to the packet forwarding authority; if the number of tokens in the bucket is not
enough, it means that too many tokens have been used and the traffic is excess.
2 Complicated evaluation
You can set two token buckets in order to evaluate more complicated conditions and
implement more flexible regulation policies. For example, TP includes 4 parameters:
CIR
CBS
PIR (Peak Information Rate)
EBS (Excess Burst Size)
Put tokens into the bucket at the set rate
Put tokens into the bucket at the set rate
Put tokens into the bucket at the set rate
Put tokens into the bucket at the set rate
按规定的速率向桶内放置令牌
按规定的速率向桶内放置令牌
按规定的速率向桶内放置令牌
按规定的速率向桶内放置令牌
按规定的速率向桶内放置令牌
按规定的速率向桶内放置令牌
按规定的速率向桶内放置令牌
Classify
Classify
Classify
Classify
分类
分类
分类
分类
分类
分类
分类
Introduction to QoS 217
Continue to send
Continue to send
Continue to send
Continue to send
Continue to send
Continue to send
Continue to send
继续发送
继续发送
继续发送
继续发送
继续发送
继续发送
继续发送
Token bucket
Token bucket
Token bucket
Token bucket
令牌桶
令牌桶
令牌桶
令牌桶
令牌桶
令牌桶
令牌桶
Drop
Drop
Drop
Drop
丢弃
丢弃
丢弃
丢弃
丢弃
丢弃
丢弃

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents