3Com 4200G 12-Port Configuration Manual page 24

10 C 2: L
HAPTER OGGING INTO AN
Common User Interface
Configuration
E S
THERNET WITCH
Table 10 Common user interface configuration
Operation
Lock the current user
interface
Specify to send messages
to all user interfaces/a
specified user interface
Disconnect a specified user
interface
Enter system view
Enter user interface view
Set the command that is
automatically executed
when a user logs into the
user interface
Display the information
about the current user
interface/all user interfaces
Display the physical
attributes and
configuration of the
current/a specified user
interface
CAUTION:
The auto-execute command command may cause you unable to perform
■
common configuration in the user interface, so use it with caution.
Before executing the auto-execute command command and save your
■
configuration, make sure you can log into the switch in other modes and cancel
the configuration.
Command
lock
send { all | number | type
number }
free user-interface [ type ]
number
system-view
user-interface [ type ]
first-number [ last-number ]
auto-execute command
text
display users [ all ]
display user-interface [
type number | number ]
Description
Optional
Execute this command in user view.
A user interface is not locked by
default.
Optional
Execute this command in user view.
Optional
Execute this command in user view.
—
—
Optional
By default, no command is
automatically executed when a user
logs into a user interface.
You can execute this command in
any view.
You can execute this command in
any view.