3Com 4200G 12-Port Configuration Manual page 360

346 C 39: I
HAPTER NFORMATION
Enabling Information
Output to a Log Host
Enabling Information
Output to the Console
C
ENTER
Table 299 lists the related configurations on the switch.
Table 299 Enable information output to a log host
Operation
Enter system view
Enable the information
center
Define an information
source
To view the debug information of specific modules, you need to set the information
type as debug in the info-center source command, and enable the debugging
function on corresponding modules by using the debugging command.
Table 300 lists the related configurations on the switch.
Table 300 Enable information output to the console
Operation
Enter system view
Enable the information
center
Enable information
output to the console
Define an information
source
Set the format of time
stamp
To view debug/log/trap output information on the console, you should also enable
the corresponding debug/log/trap terminal display on the switch.
For example, to view log information of the switch on the console, you should not
only enable log information output to the console, but also enable logging terminal
display with the terminal logging command.
Enter the following commands in user view.
Table 301 Enable debug/log/trap terminal display
Operation
Enable the
debug/log/trap
terminal display
function
Command
system-view
info-center enable
info-center source { modu-name
| default } channel
{ channel-number |
channel-name } [ { log | trap |
debug } * { level severity | state
state } * ]
Command
system-view
info-center enable
info-center console channel
{ channel-number |
channel-name }
info-center source { modu-name
| default } channel
{ channel-number |
channel-name } [ { log | trap |
debug } * { level severity | state
state } * ]
info-center timestamp { log |
trap | debugging } { boot | date
| none }
Command
terminal monitor
Description
—
Optional
By default, the information center is
enabled.
Required
Description
—
Optional
By default, the information center is
enabled.
Required
By default, the switch does not
output information to the console.
Required
Optional
Description
Optional
By default, this function is enabled
for console user.