3Com 4200G 12-Port Configuration Manual page 272

258 C 29: IGMP S
HAPTER
C
NOOPING ONFIGURATION
Configuration procedure
The following configuration is based on the prerequisite that the devices are properly
connected and all the required IP addresses are already configured.
1 Configure Switch A:
a Set the interface IP address of VLAN 20 to 168.10.1.1 and enable the PIM DM
protocol on the VLAN interface.
<Switch A> system-view
[ Switch A] multicast routing-enable
[ Switch A] vlan 20
[ Switch A-vlan20] interface vlan-interface 20
[ Switch A-Vlan-interface20] ip address 168.10.1.1 255.255.255.0
[ Switch A-Vlan-interface20] pim dm
[ Switch A-Vlan-interface20] quit
b Configure VLAN 10.
[ Switch A] vlan 10
[ Switch A-vlan10] quit
c Define the GigabitEthernet 1/0/10 port as a hybrid port, add the port to VLAN 2,
VLAN 3 and VLAN 10, and configure the port to include VLAN tags in its outbound
packets for VLAN 2, VLAN 3 and VLAN 10.
[ Switch A] interface GigabitEthernet 1/0/10
[ Switch A-GigabitEthernet 1/0/10] port link-type hybrid
[ Switch A-GigabitEthernet 1/0/10] port hybrid vlan 2 3 10 tagged
[ Switch A-GagabitEthernet 1/0/10] quit
d Enable PIM DM and IGMP on VLAN 10.
[ Switch A] multicast routing-enable
[ Switch A] interface Vlan-interface 10
[ Switch A-Vlan-interface10] pim dm
[ Switch A-Vlan-interface10] igmp enable
2 Configure Switch B:
a Enable IGMP Snooping globally.
<Switch B> system-view
[ Switch B] igmp-snooping enable
b Configure VLAN 10 as a multicast VLAN and enable IGMP Snooping on it.
[ Switch B] vlan 10
[ Switch B-vlan10] service-type multicast
[ Switch B-vlan10] igmp-snooping enable
[ Switch B-vlan10] quit
c Define the GigabitEthernet 1/0/10 port as a hybrid port, add the port to VLAN 2,
VLAN 3 and VLAN 10, and configure the port to include VLAN tags in its outbound
packets for VLAN 2, VLAN 3 and VLAN 10.
[ Switch B] interface GigabitEthernet 1/0/10
[ Switch B-GigabitEthernet 1/0/10] port link-type hybrid
[ Switch B-GigabitEthernet 1/0/10] port hybrid vlan 2 3 10 tagged
[ Switch B-GigabitEthernet 1/0/10] quit
d Define the GigabitEthernet 1/0/1 port as a hybrid port, add the port to VLAN 2
and VLAN 10, and configure the port exclude VLAN tags from its outbound
packets for VLAN 2 and VLAN 10, VLAN 2 as the default VLAN of the port.
[ Switch B] interface GigabitEthernet 1/0/1
[ Switch B-GigabitEthernet 1/0/1] port link-type hybrid
[ Switch B-GigabitEthernet 1/0/1] port hybrid vlan 2 10 untagged
[ Switch B-GigabitEthernet 1/0/1] port hybrid pvid vlan 2