3Com 4200G 12-Port Configuration Manual page 355

Network diagram
Figure 109 Network diagram for TFTP configuration
S w itc h S w itc h S w itc h
Configuration procedure
1 Start the TFTP server and configure the work directory on the PC.
2 Configure the switch.
a Log into the switch. (You can log into a switch through the Console port or by
Telneting to the switch. See Chapter 2 for detailed information.)
<S4200G>
CAUTION: If the free space of the Flash of the switch is insufficient to hold the file to
be downloaded, you need to delete useless files in the flash to make room for the file.
b Enter system view
<S4200G> system-view
System View: return to User View with Ctrl+Z.
[4200G]
c Configure the IP address of a VLAN interface on the switch to be 1.1.1.1, and
ensure that the port through which the switch connects with the PC belongs to
this VLAN. (This example assumes that the port belongs to VLAN 1.)
[4200G] interface vlan 1
[4200G-vlan-interface1] ip address 1.1.1.1 255.255.255.0
[4200G-vlan-interface1] quit
d Download the application named switch.bin from the TFTP server to the switch.
<S4200G> tftp 1.1.1.2 get switch.bin switch.bin
e Upload the configuration file named vrpcfg.txt to the TFTP server.
<S4200G> tftp 1.1.1.2 put vrpcfg.txt vrpcfg.txt
f Specify the downloaded file (the file named switch.bin) to be the startup file used
when the switch starts the next time and restart the switch. Thus the switch
application is upgraded.
<S4200G> boot boot-loader switch.bin
<S4200G> reboot
TFTP Configuration 341
N e tw o rk N e tw o rk
P C P C