HGMP V2
Configuration
Example
Table 247 Display and maintain cluster configurations (Continued)
Operation
Command
Display state and
display cluster
statistics information
about a cluster
Display the information
display cluster candidates [
about the candidate
mac-address H-H-H | verbose ]
devices of a cluster
Display the information
display cluster members [
about the cluster
member-number | verbose ]
members
Clear the NDP statistics
reset ndp statistics [ interface
on a port
port-list ]
Network requirements
Three switches form a cluster, in which:
The management device is an S4200G series switch.
■
The rest are member devices.
■
The S4200G series switch operates as the management device of the cluster. Other
detailed information about the cluster is as follows.
The two member devices are connected to GigabitEthernet1/0/2 and
■
GigabitEthernet1/0/3 ports of the management device.
The management device is connected to the external network through its
■
GigabitEthernet1/0/1 port.
GigabitEthernet1/0/1 port of the management device belongs to VLAN2, whose
■
interface IP address is 163.172.55.1.
All the devices in the cluster use the same FTP server and TFTP server.
■
The FTP server and TFTP server share one IP address: 63.172.55.1.
■
The SNMP site and log host share one IP address: 69.172.55.4.
■
HGMP V2 Configuration Example 273
Remark
Optional
This command can be executed in
any view.
Optional
This command can be executed in
any view.
Optional
This command can be executed in
any view.