3Com 4200G 12-Port Configuration Manual page 395

Notes
Perform the operations listed in Table 330 in cluster view on the master device. The
configuration can only be synchronized to the member devices in the white list only.
The configuration remains valid on a member device even if it quits the cluster or is
removed from the white list.
Configuration example
Synchronize the following SNMP configuration to all the member devices in a cluster
for logging into the cluster through an SNMP host.
1 Set read-community name to "aaa", write-community name to "bbb", group name
to "ggg", and MIP view name to "mmm". The MIP view contains the "org" sub-tree.
2 Set an SNMP V3 user named "uuu". The user belongs to the group named "ggg".
Network requirements
Figure 121 Network diagram for SNMP configuration synchronization
IP address 1.1.1.66 IP address 1.1.1.66
PC as the server PC as the server
3 Configuration procedure
# Enable NDP and NTDP.
<S4200G>system-view
System View: return to User View with Ctrl+Z.
[S4200G]ndp enable
# Create a cluster.
[S4200G]cluster
[S4200G-cluster]ip-pool 168.192.0.1 24
[S4200G-cluster]build chwn
[chwn_0.S4200G-cluster]
# Configure a TFTP server and an SNMP host for the cluster.
[chwn_0.S4200G-cluster]tftp-server 1.1.1.66
[chwn_0.S4200G-cluster]snmp-host 1.1.1.66
# Member devices join the cluster automatically.
[chwn_0.S4200G-cluster]
%Apr 7 03:00:07:981 2000 chwn_0.S4200G CLST/5/LOG:- 1 -
Member 000f-e224-055f is joined in cluster chwn.
%Apr 7 03:00:08:098 2000 chwn_0.S4200G CLST/5/LOG:- 1 -
Member 000f-e224-0560 is joined in cluster chwn.
Introduction to the Newly Added Cluster Functions 381
_ _
Port P Port P _ _ 1/0/1 1/0/1 Port P 1/0/4 Port P 1/0/4
Command sw itch Command sw itch
Port P 1/0/3 Port P 1/0/3
_ _
Member 1 Member 1
Port P 1/0/1 Port P 1/0/1
_ _
Member 2 Member 2
000f-e224-0562 000f-e224-0562
000f-e224-0560 000f-e224-0560
Port P 1/0/2 Port P 1/0/2
000f-e224-055f 000f-e224-055f