3Com 4200G 12-Port Configuration Manual page 362

348 C 39: I
HAPTER NFORMATION
Enabling Information
Output to the Log Buffer
Enabling Information
Output to the Trap
Buffer
C
ENTER
Perform the following configuration in user view.
Table 303 Enable debug/log/trap terminal display
Operation
Enable the
debug/log/trap
terminal display
function
Enable debugging
terminal display
Enable logging
terminal display
Enable trapping
terminal display
Table 304 lists the related configurations on the switch.
Table 304 Enable information output to the log buffer
Operation
Enter system view
Enable the information
center
Enable information
output to the log
buffer
Define an information
source
Set the format of time
stamp
To view debug information of specific modules, you need to set the information type
as debug in the info-center source command, and enable debugging on
corresponding modules with the debugging command as well.
Table 305 lists the related configurations on the switch.
Table 305 Enable information output to the trap buffer
Operation
Enter system view
Enable the information
center
Command
terminal monitor
terminal debugging
terminal logging
terminal trapping
Command
system-view
info-center enable
info-center logbuffer [ channel
{ channel-number |
channel-name } | size buffersize ]
info-center source { modu-name
| default } channel
{ channel-number |
channel-name } [ { log | trap |
debug } * { level severity | state
state } * ]
info-center timestamp { log |
trap | debugging } { boot | date
| none }
Command
system-view
info-center enable
Description
Optional
By default, this function is enabled for
console user.
Optional
By default, debugging terminal display is
disabled for terminal users.
Optional
By default, logging terminal display is
enabled for console users.
Optional
By default, trapping terminal display is
enabled for terminal users.
Description
—
Optional
By default, the information center is
enabled.
Optional
By default, the switch outputs
information to the log buffer, which
can holds up to 512 items by
default.
Required
Optional
This is to set the time stamp format
for log/debug/trap information
output.
This determines how the time
stamp is presented to users.
Description
—
Optional
By default, the information center is
enabled.