Voice Vlan Configuration - 3Com 4200G 12-Port Configuration Manual

Voice VLAN
Configuration
Configuration
Prerequisites
Configuring a voice
VLAN to operate in
automatic mode
Configuring a voice
VLAN to operate in
manual mode
Create the corresponding VLAN before configuring a voice VLAN.
■
VLAN 1 is the default VLAN and do not need to be created. But VLAN 1 does not
■
support the voice VLAN function.
Table 38 Configure a voice VLAN to operate in automatic mode
Operation Command
Enter system view system-view
Enter port view interface interface-type
interface-number
Enable the voice VLAN voice vlan enable
function for the port
Set the voice VLAN voice vlan mode auto
operation mode to
automatic mode
Quit to system view quit
Set an OUI address that voice vlan mac-address oui
can be identified by the mask oui-mask [ description
voice VLAN string ]
Enable the voice VLAN voice vlan security enable
security mode
Set the aging time for voice vlan aging minutes
the voice VLAN
Enable the voice VLAN voice vlan vlan-id enable
function globally
Table 39 Configure a voice VLAN to operate in manual mode
Operation
Enter system view
Enter port view
Enable the voice VLAN function
for the port
Set voice VLAN operation mode to
manual mode
Quit to system view
Description
—
Required
Required
By default, the voice VLAN function
is disabled.
Optional
The default voice VLAN operation
mode is automatic mode.
—
Optional
If you do not set the OUI address,
the default OUI address is used.
Optional
By default, the voice VLAN security
mode is enabled.
Optional
The default aging time is 1,440
minutes.
Required
Command
system-view
interface interface-type
interface-num
voice vlan enable
undo voice vlan mode auto
quit

Voice VLAN Configuration

Description
-
Required
Required
By default, the voice VLAN
function is disabled on a
port.
Required
The default voice VLAN
operation mode is
automatic mode.
-
57