3Com 4200G 12-Port Configuration Manual page 358

344 C 39: I
HAPTER NFORMATION
C
ENTER
4 Module name
It indicates the modules that generate the information. Table 295 gives some
examples of the modules.
Table 295 Examples of some module names
Module name
8021X
ACL
ARP
CFAX
CFG
CFM
CLST
CMD
Note that a slash (/) separates the module name and severity level.
5 Level
Switch information falls into three categories: log information, debug information
and trap information. Information of each category can be one of eight severities.
Information filtering prevents information whose severity is lower than the specified
threshold from being output. The higher the information severity is, the lower the
corresponding level is. For example, the "debugging" severity corresponds to level 8,
and the "emergencies" severity corresponds to level 1. When the severity threshold is
set to "debugging", all information will be output. See Table 296 for description of
severities and corresponding levels.
Table 296 Severity definitions on the information center
Severity
emergencies
alerts
critical
errors
warnings
notifications
informational
debugging
Note that a slash (/) separates the level and digest.
6 Digest
It is a phrase within 32 characters, abstracting the information contents.
A colon (:) separates the digest and information contents.
Module and description
802.1x
Access control list
Address resolution protocol
Configuration agent
Configuration management plane
Configuration file management
Cluster management
Command line
Value Description
1 The system is unavailable.
2 Errors that need to be corrected immediately
3 Critical errors
4 Common errors
5 Warnings
6 Normal information that needs to be noticed
7 Normal prompt information
8 Debug information