3Com 4200G 12-Port Configuration Manual page 28

14 C 3: L
HAPTER OGGING IN THROUGH THE
Console Port Login
Configurations for
Different Authentication
Modes
C P
ONSOLE ORT
Table 12 Common configuration of Console port login (Continued)
Configuration
Terminal Make terminal services
configuration available
Set the maximum
number of lines the
screen can contain
Set history command
buffer size
Set the timeout time of
a user interface
CAUTION: Changing of Console port configuration terminates the connection to the
Console port. To establish the connection again, you need to modify the
configuration of the termination emulation utility running on your PC accordingly.
Refer to "Setting up the Connection to the Console Port" for more.
Table 13 lists Console port login configurations for different authentication modes.
Table 13 Console port login configurations for different authentication modes
Authentication
mode Console port login configuration
None Perform common
configuration
Password Configure the
password
Perform common
configuration
Description
Optional
By default, terminal services are available in all user
interfaces
Optional
By default, the screen can contain up to 24 lines.
Optional
By default, the history command buffer can contain
up to 10 commands.
Optional
The default timeout time is 10 minutes.
Description
Perform common Optional
configuration for
Refer to "Common
Console port login
Configuration" for more.
Configure the Required
password for local
authentication
Perform common Optional
configuration for
Refer to "Common
Console port login
Configuration" for more.