3Com 4200G 12-Port Configuration Manual page 178

164 C 21: 802.1
HAPTER
C
X ONFIGURATION
6 Assign IP addresses to the secondary authentication and accounting RADIUS server.
[4200G-radius-radius1] secondary authentication 10.11.1.2
[4200G-radius-radius1] secondary accounting 10.11.1.1
7 Set the password for the switch and the authentication RADIUS servers to exchange
messages.
[4200G -radius-radius1] key authentication name
8 Set the password for the switch and the accounting RADIUS servers to exchange
messages.
[4200G-radius-radius1] key accounting money
9 Set the interval and the number of retries for the switch to send packets to the
RADIUS servers. Set the timer and the number of times that a switch will resend
packets to the RADIUS server
[4200G-radius-radius1] timer 5
[4200G-radius-radius1] retry 5
10 Set the timer for the switch to send real-time accounting packets to the RADIUS
servers.
[4200G-radius-radius1] timer realtime-accounting 15
11 Specify to send user names to the RADIUS servers with the domain name truncated.
Configure to send the user name to the RADIUS server with the domain name
removed beforehand.
[4200G-radius-radius1] user-name-format without-domain
[4200G-radius-radius1] quit
12 Create the default user domain named aabbcc.net and enter user domain view.
[4200G] domain default enable aabbcc.net
13 Specify to adopt the RADIUS scheme named radius1 as the RADIUS scheme of the
user domain.
14 Specify radius 1 as the RADIUS scheme.
[4200G-isp-aabbcc.net] scheme radius-scheme radius1 local
15 Specify the maximum number of users the user domain can accommodate to 30.
Configure the domain capacity to be 30.
[4200G-isp-aabbcc.net] access-limit enable 30
16 Enable the idle disconnecting function and set the related parameters.
[4200G-isp-aabbcc.net] idle-cut enable 20 2000
17 Create a local access user account.
[4200G] local-user localuser
[4200G-luser-localuser] service-type lan-access
[4200G-luser-localuser] password simple localpass