3Com 4200G 12-Port Configuration Manual page 38

24 C 3: L
HAPTER OGGING IN THROUGH THE
C P
ONSOLE ORT
Network diagram
Figure 7 Network diagram for AUX user interface configuration (with the authentication
mode being scheme)
User PC running Telnet User PC running Telnet
Configuration procedure
1 Enter system view.
<S4200G> system-view
2 Create a local user named guest and enter local user view.
[4200G] local-user guest
3 Set the authentication password to 123456 (in plain text).
[4200G-luser-guest] password simple 123456
4 Set the service type to Terminal.
[4200G-luser-guest] service-type terminal level 2
[4200G-luser-guest] quit
5 Enter AUX user interface view.
[4200G] user-interface aux 0
6 Configure to authenticate users logging in through the Console port in the scheme
mode.
[4200G-ui-aux0] authentication-mode scheme
7 Specify commands of level 2 are available to users logging into the AUX user
interface.
[4200G-ui-aux0] user privilege level 2
8 Set the baud rate of the Console port to 19,200 bps.
[4200G-ui-aux0] speed 19200
9 Set the maximum number of lines the screen can contain to 30.
[4200G-ui-aux0] screen-length 30
10 Set the maximum number of commands the history command buffer can store to 20.
[4200G-ui-aux0] history-command max-size 20
11 Set the timeout time of the AUX user interface to 6 minutes.
[4200G-ui-aux0] idle-timeout 6
Ethernet1/0/1 Ethernet1/0/1
Ethernet Ethernet