Led Indicators; Buttons; Raid Cage Bay - Gateway ALR 8200R User Manual

26 Gateway ALR 8200R User's Guide

LED Indicators

Table 1 shows the front panel indicator LEDs and their functions. See
Figure 13 on page 24 for the locations of the indicator LEDs.
Table 1: Front Panel LED Indicator Lights
LED
Power
Hard Disk Controller Activity The hard disk is being accessed.
ECC Error

Buttons

Table 2 shows the front panel buttons and their functions. See Figure 13 on
page 24 for the locations of the buttons.
Table 2: Front Panel Buttons
Switch
Power
Reset
ECC Reset

RAID Cage Bay

The Raid cage bay supports up to three LVD SCA Ultra2 SCSI drives.
These drive can be included as a RAID subsystem or they can be used
independently. For more information on the drives, see "Installing an
Internal 3.5-inch Device" on page 57 and "Replacing (Hot-Swapping) a
Drive." on page 63.
Meaning When Lit
The system is on.
An ECC error has occurred.
Function
Turns the system ON or OFF.
Allows you to reset the system without having to
power it off and then on again
Clears the error flag after an ECC error. Pressing
this button does not correct the error condition. If
the error condition has not been corrected, the LED
will light again.