Chassis Fans; Power Connectors - Gateway ALR 8200R User Manual

30 Gateway ALR 8200R User's Guide
U External boot ROM connector
V 2
I C connector
W SCSI B connector
X SCSI A connector
Y Clear CMOS jumper
Z Battery
AA ISA slot 2
AB ISA slot 1 (shared w/ secondary PCI slot 4) AT
AC Secondary PCI slot 4 (shared w/ ISA slot 1) AU
AD Secondary PCI slot 3/RAIDport slot
AE Secondary PCI slot 2
AF Secondary PCI slot 1
AG Primary PCI slot 3
AH Primary PCI slot 2
AI Primary PCI slot 1
AJ RJ-45 ethernet port
AK Stacked dual USB ports
AL Video port

Chassis Fans

There are several chassis fan connectors on the system board. These
connectors provide power for cooling fans that may be positioned in several
parts of the chassis to provide cooling for critical components.

Power Connectors

The power connectors provide all of the power to the system board. These
connectors are designed to accommodate the power supply installed in the
system.
Standby 3.3-V Power Connector
The 3.3-V standby power connector provides connection for a switch to
place the system in standby power mode.
Soft Power Connector
The soft power connector provides for a power switch that causes the
system to power up or power down from a standby state, rather than
completely shutting down. This feature is not implemented in this system
AM Mouse port/keyboard port
AN Serial port 2
AO Parallel port
AP Serial port 1
AQ Processor connector 1
AR Processor connector 2
AS DIMM connectors (x4)
DIMM bank A
DIMM bank B
AV DIMM bank C
AW DIMM bank D
AX Processor 1 fan connector
AY Embedded VRM for processor 1
AZ Optional VRM for processor 2
BA Processor 2 fan connector
BB Processor setting jumper
BC RAID cage connector
BD LED display connector