Front Panel Connectors - Gateway ALR 8200R User Manual

Power Supply Auxiliary Connector
Provides additional connections from the power supply to the system board.

Front Panel Connectors

The front panel connector provides the signals for the front panel indicator
LEDs and the front panel buttons. Not used in the system.
P5 Fault Reset Connector
Allows connection of a reset switch for processor fault conditions. This
switch will not reset the processor or remove the fault condition, it clears
the fault alert flag and causes the fault LED to turn off. If the fault condition
persists, the processor fault LED will turn back on.
Reset Connector
The reset connector provides the connection of the reset button from the
front panel.
External HDD Connector
The external hard drive connector allows you to connect a cable from an
external hard drive to the system board to allow the hard drive activity LED
and system monitoring hardware to recognize the external drive.
HDD LED Connector
This connector allows you to connect all of the hard drives to the hard drive
activity connector on the front panel.
EDC Reset Connector
The EDC reset connector provides the connection for a keyboard lock
button/ECC reset button from the front panel. Not used.
System Board 31