Led Information - Gateway Server E-9520T User Manual

CHAPTER 1: Checking Out Your Gateway Server

LED information

8
See the following table for a description of this server's LEDs and the
information they provide:
LED Name Function
ID Aid in server
identification
System Fault Visible fault
warning
Hard drive Indicate drive
tray status and
activity
LAN (front) Identify NIC
status
NIC status Identify NIC
LEDs states
Power LED Identify the
power state of
the system
Power supply Identify power
status LED supply fault
Location Color
Front panel and Yellow
back of system (front)
board Blue (back)
Front panel Red
On each hard Blue or Red
drive tray
Front panel Blue
Front panel and Green/
back I/O panel Yellow
RJ-45
connectors
Front panel Blue
Power supply Green or
module Red
www.gateway.com
Description
On - Server identification
enabled
Off - No fault
Blinking - Non-critical
system fault
On - Critical system fault
Blue (On) - Hard drive okay
Blue (Blinking) - Hard drive
activity
Red (On) - Hard drive fault
Red (Blinking) - Hard drive
rebuilding
Off - No hard drive
On - LAN link for any NIC
Blinking - LAN activity for
any NIC
Off - No link for any NIC
LED 1 Green (On) - NIC
linked
LED 1 Green (Blinking) - NIC
activity
LED 1 (Off ) - No link
LED 2 Yellow (On) Link speed
1 Gbps
LED 2 Yellow (Off ) - Link at
other speed
Off - Power is off (or S5)
On - Power is on (or S0)
Green (On) - Power supply
good and receiving power
Red (On) - Power supply
fault
Off - Power supply not
receiving power