Gateway ALR 8200R User Manual page 81

– IDE Removable - Select this option of the drive is a removable
disk drive.
– ATAPI Removable - Select this option if the drive is an ATAPI
removable disk drive.
–
None - "Auto" has been unable to supply the drive type or
select "None" to disable any drive installed.
•
Multi-Sector Transfers: enabling this option allows multiple
sector data transfers on compatible drives. The options are
DISABLED, STANDARD, 2 SECTORS, 4 SECTORS, 8 SECTORS,
.
16 SECTORS
•
LBA Mode Control: enabling this option causes Logical Block
Addressing to be used in place of Cylinders, Heads and Sectors.
The options are ENABLED
•
32 Bit I/O: enabling this option allows 32-bit communication
between the processor and the IDE controller. The options are
ENABLED and DISABLED
•
Transfer Mode: selects the method for moving data to and from
the drive. The options listed are those supported by the drive and
the platform; either
and ; or
FAST PIO 4
.
DMA F
•
Ultra DMA Mode: enabling this option allows a faster data
transfer rate with compatible drives. The options are
.
DISABLED
and DISABLED .
.
STANDARD, FAST PIO 1, FAST PIO 2, FAST PIO 3,
STANDARD, FAST DMA A, FAST DMA B
and
, and
FAST
ENABLED and
Using the BIOS Setup Utility 71