Gateway ALR 8200R User Manual page 127

Error Message
Memory size error.
Non-system disk or disk
error.
Not enough memory.
Print queue is full.
Printer is out of paper.
Required parameter missing.
Syntax error.
Time and date not set.
Write protect error.
Solutions
Enter BIOS Setup and save the memory
configuration.
•
Eject the disk and press
•
If the disk is bootable, check it for errors.
Close all programs that are not currently in use.
•
Wait until the current print job has completed
before sending another print job.
•
If you receive this error often, you need to
add memory to the printer.
•
Add paper to the printer.
•
Make certain the printer is online.
•
Make certain you entered the right
command.
•
If you are trying to exit MS-DOS to return to
Windows, type exit and press
•
Make certain you entered the right
command.
•
If you are trying to exit MS-DOS to return to
Windows, type exit and press
Enter BIOS Setup to set the system's date and
time.
Move the write-protection tab over the hole on
the back of the disk.
.
ENTER
.
ENTER
.
ENTER
Error Messages 117