Installing A Vrm (For Processor 2) - Gateway ALR 8200R User Manual

Note:
The VRM for processor 1 is
integrated on the system
board. Install a VRM only if
installing a second
processor.
44 Gateway ALR 8200R User's Guide

Installing A VRM (for Processor 2)

Each processor requires a VRM to set the incoming voltage level for the
processor. The VRM for processor 1 is integrated into the system board. A
socket is provided to accommodate the VRM for processor 2. When you
install a second processor, you must also install a VRM.
Open the system and locate the VRM socket on the system board.
1.
(See "System Board" on page 29.)
Installing a VRM
Figure 21: Installing a VRM