Gateway ALR 8200R User Manual page 98

88 Gateway ALR 8200R User's Guide
14. Enter BIOS Setup by pressing
in BIOS Setup, press
the beginning of this process.
If you do not set the CMOS values back to defaults using the
the correct values from your earlier configuration, the system may
function erratically.
You may encounter a CMOS checksum error or other problem after the
system restarts. If so, try turning the system off and then restarting. CMOS
checksum errors require that you enter BIOS Setup, check your settings,
save your settings, and exit setup.
when prompted during startup. Once
F
1
and then re-enter the values you wrote down at
5
F
key or
F
5