Gateway ALR 8200R User Manual page 67

14. Enter the appropriate drive information in BIOS Setup, then reboot the
system.
Installing an Internal 3.5-inch Device
There are two 3.5-inch drive mounting brackets inside the processor drawer
that are not accessible from the outside of the system. These brackets are
intended for mounting 3.5-inch hard drives or similar devices.
Installing an Internal 3.5-inch Device
1. Turn the system power off.
2. Open the system by removing the top cover.
Install the mounting brackets (2) onto the device with the screws
3.
supplied.
Figure 30: Installing an Internal 3.5-inch Device
Storage Bays 57