View Traffic Meter Statistics For A Lan Account - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Your settings are saved. The new account is added to the LAN Traffic Meter Table on the
LAN Traffic Meter screen.

View Traffic Meter Statistics for a LAN Account

The following procedure describes how to view the traffic meter statistics for a LAN IPv4
address account.

To view the traffic meter statistics for a LAN IPv4 address account:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > LAN Settings.
The LAN submenu tabs display with the LAN Setup screen in view.
7. Click the Advanced option arrow in the upper right.
The IPv4 LAN Advanced screen displays.
8. Click the LAN Traffic Meter tab.
The LAN Traffic Meter screen displays.
9. In the LAN Traffic Meter Table, click the Edit button for the account for which you want to
view the statistics.
The Edit LAN Traffic Meter Account screen displays that traffic statistics.
Monitor System Access and Performance
564