Remove One Or More Secondary Wan Addresses - NETGEAR ProSafe FVS336Gv2 Reference Manual
Prosafe dual wan gigabit ssl vpn firewall
Hide thumbs
Also See for ProSafe FVS336Gv2:
- Installation manual (2 pages) ,
- Reference manual (203 pages) ,
- Datasheet (3 pages)
Table of Contents
Advertisement
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
10.
Click the Add button.
The secondary IP address is added to the List of Secondary WAN addresses table.
11.
Repeat
Step 9
of Secondary WAN addresses table.
Remove One or More Secondary WAN Addresses
The following procedure describes how to remove one or more secondary WAN addresses
from a WAN IPv4 interface.
To remove one or more secondary WAN addresses:
1.
On your computer, launch an Internet browser.
2.
In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3.
In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4.
If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5.
Click the Login button.
The Router Status screen displays.
6.
Select Network Configuration > WAN Settings > WAN Setup.
The WAN Setup screen displays the IPv4 settings.
7.
In the WAN IPv4 Settings table, click the Edit button for the WAN interface for which you
want to remove one or more secondary WAN addresses.
The WAN IPv4 ISP Settings screen displays.
8.
Click the Secondary Addresses option arrow in the upper right.
The WAN Secondary Addresses screen displays for the WAN interface that you selected.
9.
In the List of Secondary WAN addresses table, select the check box to the left of the
address that you want to remove or click the Select All button to select all addresses.
10.
Click the Delete button.
The selected addresses are removed from the List of Secondary WAN addresses table.
and
Step 10
for each secondary IP address that you want to add to the List
Configure the IPv4 Internet and WAN Settings
62
Advertisement
Table of Contents
Troubleshooting
