NETGEAR ProSafe FVS336Gv2 Reference Manual page 260

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
13. Enter the settings as described in the following table.
Setting
Service
Action
Send to LAN Server
WAN Destination IP
Address
WAN Users
QoS Profile
Log
Bandwidth Profile
14. Click the Apply button.
Your settings are saved. The new rule is added to the Inbound Services table on the LAN
WAN Rules screen.
15. To test the connection from a computer on the Internet, type http://<IP_address>.
<IP_address> is the public IP address that you mapped to your web server. The home
page of your web server displays.
Description
From the menu, select HTTP.
From the menu, select ALLOW always.
From the menu, select Single address.
In the Start field, enter the LAN IP address of the web server.
From the menu, select the secondary WAN IP address that you added in
Step 10.
From the menu, select Any.
You can leave the selection from the menu at None.
You can leave the selection from the menu at Never.
You can leave the selection from the menu at NONE.
Customize Firewall Protection
259
Step 9 and