Manage Ipsec Vpn Policies Manually - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2

To display the IPSec VPN log on the VPN firewall:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Monitoring > VPN Logs > IPSec VPN Logs.
The IPSec VPN Logs screen displays.

Manage IPSec VPN Policies Manually

After you have used the VPN Wizard to set up a VPN tunnel, a VPN policy and an IKE policy
are stored in separate policy tables. The name that you selected as the VPN tunnel
connection name during the VPN Wizard setup identifies both the VPN policy and IKE policy.
Set Up Virtual Private Networking With IPSec Connections
365