ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
The Router Status screen displays.
6.
Select VPN > IPSec VPN > VPN Wizard.
The VPN Wizard screen displays the IPv4 settings.
7.
Click the VPN Wizard default values option arrow in the upper right.
The VPN Wizard default values pop-up screen displays. The default values are the same
for IPv4 and IPv6.
Create an IPv4 Gateway-to-Gateway VPN Tunnel with the
Wizard
The following figure shows an example of an IPv4 gateway-to-gateway IPSec VPN
connection and the following procedure describes how to set up an IPv4 gateway-to-gateway
VPN tunnel using the VPN Wizard.
Set Up Virtual Private Networking With IPSec Connections
336