Manage The Lan Ipv4 Traffic Meter - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Setting
Increase this month
limit by
This month limit
Traffic Counter
Restart Traffic
Counter
Send e-mail report
before restarting
counter
When Limit is reached
Block Traffic
Send e-mail alert
9. Click the Apply button.
Your settings are saved.

Manage the LAN IPv4 Traffic Meter

The following sections provide information about managing the LAN IPv4 traffic meter:
• Configure and Enable the Traffic Meter for a LAN IPv4 Address Account
• View Traffic Meter Statistics for a LAN Account
• Change the Traffic Meter for a LAN Account
• Remove One or More LAN Traffic Meter Accounts
Description
Select this check box to temporarily increase a previously specified monthly traffic
volume limit, and enter the additional allowed volume in MB. The default setting is 0
MB.
Note: When you click the Apply button to save these settings, this field is reset to 0
MB so that the increase is applied only once.
This is a nonconfigurable field that displays the total monthly traffic volume limit that
applies to this month. This total is the sum of the monthly traffic volume and the
increased traffic volume.
Select when the traffic counter restarts:
• Restart Traffic Counter Now. Select this option and click the Apply button at
the bottom to restart the traffic counter immediately.
• Restart Traffic Counter at a Specific Time. Restart the traffic counter at a
specific time and day of the month. Complete the time fields and select the
meridiem and the day of the month from the menus.
An email report is sent immediately before the counter restarts. Ensure that emailing
of logs is enabled (see Enable and Schedule Emailing of Logs
Select which action the VPN firewall performs when the traffic limit is reached:
• Block All Traffic. All incoming and outgoing Internet and email traffic is
blocked.
• Block All Traffic Except E-Mail. All incoming and outgoing Internet traffic is
blocked but incoming and outgoing email traffic is still allowed.
An email alert is sent when traffic is blocked. Ensure that emailing of logs is enabled
(see Enable and Schedule Emailing of Logs
Monitor System Access and Performance
560
on page 569).
on page 569).