NETGEAR ProSafe FVS336Gv2 Reference Manual page 543

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2

To change an SNMP configuration:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Administration > SNMP.
The SNMP screen displays.
7. In the SNMP Configuration table, click the Edit button for the SNMP configuration that you
want to change.
The Edit SNMP screen displays.
8. Change the settings.
For information about the settings, see
Trap Events on page 538.
9. Click the Apply button.
Your settings are saved. The modified SNMP configuration displays in the SNMP
Configuration table on the SNMP screen.
Set Up an SNMP Configuration and Specify the
Optimize Performance and Manage Your System
541