NETGEAR ProSafe FVS336Gv2 Reference Manual page 37

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > WAN Settings > WAN Setup.
The WAN Setup screen displays the IPv4 settings.
7. In the IPv4 WAN Settings table, click the Edit button for the WAN interface that you want to
configure.
The WAN IPv4 ISP Settings screen displays.
8. In the Internet (IP) Address section, select the Use Static IP Address radio button.
9. Configure the IP address settings as described in the following table.
Setting
IP Address
Description
The static IP address assigned to you. This address identifies the VPN firewall to
your ISP.
Configure the IPv4 Internet and WAN Settings
37