NETGEAR ProSafe FVS336Gv2 Reference Manual page 57

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > WAN Settings > WAN Mode.
The WAN Mode screen displays.
7. In the Load Balancing Settings section, configure the following settings:
a. Select the Primary WAN Mode radio button.
b. From the corresponding menu on the right, select a WAN interface to function as the
primary WAN interface.
The other WAN interface becomes disabled.
c. Select the Auto Rollover check box.
d. From the corresponding menu on the right, select a WAN interface to function as the
backup WAN interface.
Note: Ensure that the backup WAN interface is configured before enabling
auto-rollover mode.
8. Click the Apply button.
Configure the IPv4 Internet and WAN Settings
57