NETGEAR ProSafe FVS336Gv2 Reference Manual page 407

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
7. Specify the settings that are described in the following table.
Setting
Advanced features
Mode Config
Aggressive Mode
NAT-T
Local and Remote ID
Local ID
Remote ID
8. Click the Save button.
Your settings are saved. Continue the Mode Config configuration of the VPN client with
the IPSec configuration.
Set Up Virtual Private Networking With IPSec Connections
Description
Select this check box to enable Mode Config.
Select this check box to enable aggressive mode as the mode of negotiation with
the VPN firewall.
From the menu, select Automatic to enable the VPN client and VPN firewall to
negotiate NAT-T.
From the Local ID menu, select DNS as the type of ID because you specified
FQDN in the VPN firewall configuration.
As the value of the ID, enter client.com as the local ID for the VPN client.
Note: The remote ID on the VPN firewall is the local ID on the VPN client.
From the Remote ID menu, select DNS as the type of ID because you specified
an FQDN in the VPN firewall configuration.
As the value of the ID, enter router.com as the remote ID for the VPN firewall.
Note: The local ID on the VPN firewall is the remote ID on the VPN client.
405