NETGEAR ProSafe FVS336Gv2 Reference Manual page 98

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > WAN Settings > WAN Setup.
The WAN Setup screen displays the IPv4 settings.
7. In the upper right, select the IPv6 radio button.
The WAN Setup screen displays the IPv6 settings.
8. In the IPv6 WAN Settings table, click the Edit button for the WAN interface that you want to
configure.
The WAN IPv6 ISP Settings screen displays. The following figure shows the WAN2 IPv6
ISP Settings screen as an example.
Configure the IPv6 Internet and WAN Settings
98