NETGEAR ProSafe FVS336Gv2 Reference Manual page 19

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Left LAN LEDs
Power LED
Test LED
Figure 1. Front panel
Table 1. LED descriptions
LED Activity
Power Green
Off
Test Amber during startup
Amber during any
other time
Blinking amber
Off
LAN Ports
Left LED Green
Blinking green
Off
Right LED Green
Amber
Off
DMZ LED Green
Off
Get an Overview of the Features and Hardware and Log In
DMZ LED
Right LAN LEDs
Description
Power is supplied to the VPN firewall.
Power is not supplied to the VPN firewall.
Test mode. The VPN firewall is initializing. After approximately two
minutes, when the VPN firewall has completed its initialization, the Test
LED turns off.
The initialization failed or a hardware failure occurred.
The VPN firewall is writing to flash memory during a firmware upgrade or
when you reset the VPN firewall to defaults.
The VPN firewall has booted successfully.
The LAN port detects a link with a connected Ethernet device.
The LAN port receives or transmits data.
The LAN port has no link.
The LAN port operates at 1000 Mbps.
The LAN port operates at 100 Mbps.
The LAN port operates at 10 Mbps.
LAN port 4 operates as a dedicated hardware DMZ port.
LAN port 4 operates as a normal LAN port.
19
Left WAN LEDs
Right WAN LEDs
Internet
LEDs