Programming The Traffic Meter (If Desired) - NETGEAR ProSafe Quad WAN FR538G Reference Manual

Programming the Traffic Meter (if Desired)

The traffic meter is useful when an ISP charges by traffic volume over a given period of time or if
you want to look at traffic types over a period of time.
To enable the traffic meter:
1. From the primary menu, select Monitoring, and then select Traffic Meter from the secondary
menu. The WAN1 Traffic Meter screen will display. Fill out the information described in
Table 2-2.
Figure 2-4
2. Click Apply to apply the settings. Click Reset to return to the previous settings.
Connecting the FR538G
ProSafe Quad WAN Gigabit Firewall FR538G Reference Manual
v1.0, November 2007
2-9