ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
To enable ALG for SIP:
1.
On your computer, launch an Internet browser.
2.
In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3.
In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4.
If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5.
Click the Login button.
The Router Status screen displays.
6.
Select Security > Firewall > Advanced.
The Advanced screen displays.
7.
Select the Enable SIP ALG check box.
8.
Click the Apply button.
Your settings are saved.
Manage Firewall Objects
The following sections provide information about firewall objects:
•
Firewall Objects
•
Manage Customized Services
•
Manage Service Groups
•
Manage IP Address Groups
•
Define a Schedule
Customize Firewall Protection
279