NETGEAR ProSafe FVS336Gv2 Reference Manual page 599

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
6. Select Network Configuration > WAN Settings > WAN Setup.
The WAN Setup screen displays the IPv4 settings.
7. In the upper right, select the IPv6 radio button.
The WAN Setup screen displays the IPv6 settings:
8. Click the Status button that corresponds to the WAN interface for which you want to view
the status.
The following figure shows a static IP address configuration as an example.
The type of connection determines the information that is displayed on the Connection
Status screen. The screen can display the information that is described in the following
table.
Item
Connection Time
IPv6 Connection Type
IPv6 Connection Status
Description
The period that the VPN firewall is connected through the WAN port.
The connection type can be either Dynamic IP (DHCP), Static, or PPPoE.
The connection status can be either Connected or Disconnected.
Monitor System Access and Performance
597