NETGEAR ProSafe FVS336Gv2 Reference Manual page 202

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > DMZ Setup.
The DMZ Setup screen displays the IPv4 settings.
7. In the upper right, select the IPv6 radio button.
The DMZ Setup screen displays the IPv6 settings. The following figure shows an
example.
8. Under the List of IPv6 Address Pools table, click the Add button.
The DMZ IPv6 Config screen displays.
Configure the IPv6 LAN Settings
201