NETGEAR ProSafe FVS336Gv2 Reference Manual page 34

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
• Failure Detection Method. The failure detection method that is active for the WAN
interface (see Configure the Auto-Rollover Mode and Failure Detection Method for
IPv4 Interfaces
Any of the following methods can be displayed: None, DNS Lookup (WAN DNS
Servers), DNS Lookup (the configured IP address is displayed), or PING (the
configured IP address is displayed).
• Action. The Edit button provides access to the WAN IPv4 ISP Settings screen (see
Step 7) for the corresponding WAN interface; the Status button provides access to
the Connection Status screen (see
7. In the IPv4 WAN Settings table, click the Edit button for the WAN interface for which you
want to let the VPN firewall automatically configure the connection to the Internet.
The WAN IPv4 ISP Settings screen displays. The following figure shows the WAN2 IPv4
ISP Settings screen as an example.
on page 56).
Step
Configure the IPv4 Internet and WAN Settings
34
9) for the corresponding WAN interface.