NETGEAR ProSafe FVS336Gv2 Reference Manual page 459

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
7. In the Add New Host Name for Port Forwarding section, specify information in the following
fields:
• Local Server IP Address. The IP address of the internal server or host computer that
you want to name. You can name only IP addresses that are listed in the List of
Configured Applications for Port Forwarding table.
• Fully Qualified Domain Name. The full name of the internal server or host computer.
8. In the Add New Host Name for Port Forwarding section, click the Add button.
The IP address and FQDN are added to the List of Configured Host Names for Port
Forwarding table.
Remove a Server and Port Number Configuration for SSL Port Forwarding
The following procedure describes how to remove a server and port number configuration
that you no longer need for an SSL port forwarding application or service.

To remove a server and port number configuration:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
Set Up Virtual Private Networking with SSL Connections
457