NETGEAR ProSafe FVS336Gv2 Reference Manual page 65

Prosafe dual wan gigabit ssl vpn firewall
Hide thumbs Also See for ProSafe FVS336Gv2:
Table of Contents

Advertisement

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
The WAN Mode section reports the configured WAN mode (for example, Single Port
WAN1, Load Balancing, or Auto Rollover). Only those options that match the configured
WAN mode are accessible on the screen.
7.
Click the submenu tab for your DDNS service provider:
Dynamic DNS for DynDNS.org (which is shown in the following figure)
DNS TZO for TZO.com
DNS Oray for Oray.net
3322 DDNS for 3322.org
8.
Click the Information option arrow in the upper right of a DNS screen for registration
information (for example, DynDNS Information).
9.
Visit the website of the DDNS service provider and register for an account (for example, for
DynDNS.org, visit http://www.dyndns.com/).
10.
Configure the DDNS service settings as described in the following table.
Setting
WAN1 (... Status: ...)
Select the Yes radio button to enable the DDNS service. The fields that display depend on the DDNS
service provider that you have selected.
Host and Domain Name
Username or
User Email Address
Password or User Key
Use wildcards
Update every 30 days
WAN2 (... Status: ...)
See the information for WAN1 in this table about how to enter the settings. You can select different DDNS
services for different WAN interfaces.
11.
Click the Apply button.
Description
The host and domain name for the DDNS service.
The user name or email address for DDNS server authentication.
The password that is used for DDNS server authentication.
If your DDNS provider allows the use of wildcards in resolving your URL, you
can select the Use wildcards check box to activate this feature. For example,
the wildcard feature causes *.yourhost.dyndns.org to be aliased to the same IP
address as yourhost.dyndns.org.
If your WAN IP address does not often change, you might need to force a
periodic update to the DDNS service to prevent your account from expiring. If
the Update every 30 days check box displays, select it to enable a periodic
update.
Configure the IPv4 Internet and WAN Settings
65

Advertisement

Table of Contents
loading

Table of Contents