Add Lan Wan Rules; Add Lan Wan Outbound Service Rules - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
8. From the Default Outbound Policy menu, select Block Always.
By default, Allow Always is selected.
9. Click the Apply button.
Your settings are saved.

Add LAN WAN Rules

The following sections provide information about managing LAN WAN rules:
•

Add LAN WAN Outbound Service Rules

• Add LAN WAN Inbound Service Rules
Add LAN WAN Outbound Service Rules
You can define rules that specify exceptions to the default rules. By adding custom rules, you
can block or allow access based on the service or application, source or destination IP
addresses, and time of day. An outbound rule can block or allow traffic between an internal IP
LAN address and any external WAN IP address according to a schedule.
WARNING:
Make sure that you understand the consequences of a LAN WAN
outbound rule before you apply the rule. Incorrect configuration
might cause serious connection problems.
The following sections provide information about adding LAN WAN outbound service rules:
• Add an IPv4 LAN WAN Outbound Rule
Customize Firewall Protection
223