Change A Port Triggering Rule; Remove One Or More Port Triggering Rules - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2

Change a Port Triggering Rule

The following procedure describes how to change an existing port triggering rule.

To change a port triggering rule:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Security > Port Triggering.
The Port Triggering screen displays.
7. In the Port Triggering Rules table, click the Edit button for the port triggering rule that you
want to change.
The Edit Port Triggering Rule screen displays.
8. Change the settings.
For information about the settings, see
9. Click the Apply button.
Your settings are saved. The modified port triggering rule displays in the Port Triggering
Rules table on the Port Triggering screen.

Remove One or More Port Triggering Rules

The following procedure describes how to remove one or more port triggering rules that you
no longer need.

To remove one or more port triggering rules:
1. On your computer, launch an Internet browser.
Add a Port Triggering Rule
Protect Your Network
328
on page 326.