Settings For Inbound Rules - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2

Settings for Inbound Rules

The following table describes the components that let you configure rules for inbound traffic.
For information about the actual procedures to configure inbound rules, see the following
sections:
• Add LAN WAN Inbound Service Rules
• Add DMZ WAN Inbound Service Rules
• Add LAN DMZ Inbound Service Rules
Table 6. Inbound rules overview
Setting Description
Service The service or application to be covered by this rule. If the
service or application does not display in the list, you must define
it (see
Action The action for outgoing connections covered by this rule. The
options are as follows:
•
•
•
•
Note:
is allowed by the default rule.
Select Schedule The time schedule (that is, Schedule1, Schedule2, or
Schedule3) that is used by this rule.
This menu is activated only when you select BLOCK by
schedule, otherwise allow or ALLOW by schedule,
otherwise block as the action.
For information about how to configure time schedules, see
Define a Schedule
Send to LAN Server The LAN server address determines which computer on your
network is hosting this service rule. (You can also translate this
address to a port number.) The options are as follows:
•
•
Send to DMZ Server The DMZ server address determines which computer on your
network is hosting this service rule. (You can also translate this
address to a port number.)
Translate to Port If the LAN server or DMZ server that is hosting the service is
Number using a port other than the default port for the service, you can
select this setting and specify a port number. If the service is
using the default port, you do not need to select this setting.
on page 228
on page 237
on page 246
Manage Customized Services
BLOCK always
BLOCK by schedule, otherwise allow
ALLOW always
ALLOW by schedule, otherwise block
Any inbound traffic that is not blocked by rules you create
on page 292.
Single address. Enter the required address in the Start field
to apply the rule to a single device on your LAN.
Address range. Enter the required addresses in the Start
and Finish fields to apply the rule to a range of devices.
Customize Firewall Protection
217
on page 280).
Inbound Rules
All rules
All rules
All rules when BLOCK
by schedule,
otherwise allow or
ALLOW by schedule,
otherwise block is
selected as the action
IPv4 LAN WAN rules
IPv4 DMZ WAN rules
IPv4 LAN WAN rules
IPv4 DMZ WAN rules