Use The Ipsec Vpn Wizard For Client And Gateway Configurations; Create Gateway-To-Gateway Vpn Tunnels With The Wizard - NETGEAR ProSafe SRX5308 Reference Manual

Use the IPSec VPN Wizard for Client and Gateway
Configurations
You can use the IPSec VPN Wizard to configure multiple gateway or client VPN tunnel
policies.
The following section provides wizard and NETGEAR ProSafe VPN Client software
configuration procedures for the following scenarios:
• Using the wizard to configure a VPN tunnel between two VPN gateways.
• Using the wizard to configure a VPN tunnel between a VPN gateway and a VPN client.
Configuring a VPN tunnel connection requires that all settings on both sides of the VPN
tunnel match or mirror each other precisely, which can be a daunting task. The VPN Wizard
efficiently guides you through the setup procedure with a series of questions that determine
the IPSec keys and VPN policies it sets up. The VPN Wizard also configures the settings for
the network connection: security association (SA), traffic selectors, authentication algorithm,
and encryption. The settings that are used by the VPN Wizard are based on the
recommendations of the VPN Consortium (VPNC), an organization that promotes
multivendor VPN interoperability.

Create Gateway-to-Gateway VPN Tunnels with the Wizard

Figure 76.

To set up a gateway-to-gateway VPN tunnel using the VPN Wizard.
1. Select VPN > IPSec VPN > VPN Wizard. The VPN Wizard screen displays. (The
following figure contains some entries as an example.)
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Virtual Private Networking Using IPSec Connections
136