Bottom Panel With Product Label; Choose A Location For The Vpn Firewall - NETGEAR SRX5308 Reference Manual

3. Factory Defaults Reset button. Using a sharp object, press and hold this button for about
8 seconds until the front panel Test LED flashes to reset the VPN firewall to factory default
settings. All configuration settings are lost, and the default password is restored.
4. AC power receptacle. Universal AC input (100–240 VAC, 50–60 Hz).
5. A power on/off switch.

Bottom Panel with Product Label

The product label on the bottom of the VPN firewall's enclosure displays factory default
settings, regulatory compliance, and other information.
Figure 3.

Choose a Location for the VPN Firewall

The VPN firewall is suitable for use in an office environment where it can be freestanding (on
its runner feet) or mounted into a standard 19-inch equipment rack. Alternatively, you can
rack-mount the VPN firewall in a wiring closet or equipment room. A rack-mounting kit,
containing two mounting brackets and four screws, is provided in the package.
Consider the following when deciding where to position the VPN firewall:
• The unit is accessible, and cables can be connected easily.
• Cabling is away from sources of electrical noise. These include lift shafts, microwave
ovens, and air-conditioning units.
• Water or moisture cannot enter the case of the unit.
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Introduction
17