Installation and Connection
3
3.1.4 Access to the Control and Power Terminal Strips
On CFW-11 inverters of frame sizes A, B and C with degree of protection IP2X and Nema1 and on all the
CFW-11 inverters with degree of protection IP55, it is necessary to remove the HMI and the front cover to access
the control and power terminals.
Figure 3.5 on page 3-7
inverters with degree of protection IP55.
3-6 | CFW-11
1
4
Figure 3.4 - Repositioning the mounting supports
(b) also shows the sequence to tighten the screws to mount the front cover of the
2
5
3
6