Waiting For The Next Available Co/Ip Line; Account Codes: Tracking External Calls For Billing - iPECS LIP-8012D User Manual

LIP-7016D/7024D
If Least Cost Routing is set-up, the number you dial will be analyzed
and the system will place the call on the least expensive route.
You may be assigned Dialing and/or CO/IP Line Access Restrictions,
in which case you will receive error tone if you attempt to dial or access a
restricted number/CO/IP line. CO/IP line and Station Class Of Service
(COS), which establish dialing restrictions, may vary during Day and
Night operation (Day/Night COS).
You may need to enter an
which case you will receive a second dial tone.
Your external calls may be subject to Call Time Restrictions, you will
receive a Call Warning Tone prior to disconnect.
NOTE—In the event of an emergency, assigned Emergency
numbers (ex., a 911 call) may be dialed from any station in the
System, regardless of a Station's dialing restrictions (COS).
OPERATION
To place an external call:

Lift the handset,

Select/Dial the CO/IP line/group,

Dial the desired number.

3.2.2 Waiting for the next available CO/IP line

If all the lines connected to your system are busy, you will receive an All
Trunks Busy signal. You may request to be notified when a line becomes
free.
OPERATION
To activate a queue if the selected/dialed line is busy:

Select/dial a busy CO/IP line button,

Press the

Return to an idle state by going on-hook; when the line comes
available, the Station will be notified with ringing.

3.2.3 Account Codes: Tracking External calls for billing

In some cases, you or your company may desire to track calls for billing
or other purposes. You may enter an Account Code, which is output
from the system to a printer in the SMDR report. You must have an
Account Code Flex button, see
Authorization code
button,
MSG
Assigning features to Flex
19
User Guide
before placing calls, in
buttons.