Waiting For The Next Available Outside Line; Account Codes: Tracking External Calls For Billing - iPECS LIP-9000 Series User Manual

To place an external call:
 Lift the handset.
 Dial the outside line or group number.
 Dial the desired number.

4.2.2 Waiting for the next available Outside line

If all the lines connected to your system are busy, you will receive an All
lines Busy signal. You may request to be notified when a line is available for
use.
To join a queue if the selected/dialed line is busy:
 Select the desired outside line button; when the busy notification is
returned, press the MSG button,
 Return to an idle state by going on-hook. When the line is available,
your Station will be notified (ringing).

4.2.3 Account Codes: Tracking External calls for billing

In some cases, you or your company may desire to track calls for billing or
other purposes. You may enter an Account Code, which is output from the
system in the SMDR report. You may have an Account Code flexible
button, which allows one-touch entry of an Account Code. Refer to section
10.2 Assigning Features to Flex Buttons for details about assigning an
Account Code button..
To enter an Account Code before the call:
 Lift the handset,
 Press the assigned ACCOUNT CODE button,
 Dial the Account Code (1-12 digits),
 Press *, Intercom dial tone is heard,
 Place the outside call as normal.
To enter an Account Code during a call:
 Press the assigned ACCOUNT CODE button,
 Dial the Account Code (1-12 digits),
 Press *.
28 LIP-9000 Series User Guide - ST - Issue 1.5